Z10TIR gimbal camera features an 10x optical zoom lens. It powered by 1/2.9 CMOS module, with 0.05lux@F1.6 starlight level min illumination, 2.13 mega effective pixels, fast auto-focus speed, 1080p HD image quality, combined with 10x advanced optical zoom technology , designed for UAV aerial photography. At the same time, Z10TIR can achieve target tracking. Factory, all the parameters have been perfectly set, you just need to install the gimbal camera to UAV ,then Ready to fly.The gimbal can be controlled in three directions: YAW, ROLL and PITCH , we use FOC solution can greatly compensate the vibration of UAV. The image is very stable even at ten optical zoom times.  



                                                                          Specification
Hardware Parameter
Working voltage 12V ~ 16V
Input voltage 3S ~ 4S
Output voltage 5V (connect with PWM)
Dynamic current 550mA @ 12V
Idle current 450mA @ 12V
Power consumption ≤ 6.6W
Working environment temp. -20 ~ +60
Output  micro HDMI(HD output 1080P 60fps) / IP / SDI (subject to actual product)
Local-storage SD card (Up to 128G, class 10, FAT32 or ex FAT format)
Control method PWM  / TTL / S.BUS
Gimbal Spec
Pitch/Tilt ±90°
Roll ±85°
Yaw/Pan ±170° / ±360°*N (IP/SDI output)
Vibration angle Pitch/Roll: ±0.01°, Yaw±0.01°
One-key to center
Camera Spec
Imager Sensor 1/2.9 CMOS
Picture quality Full HD 1080 (1920*1080)
Effective pixel 2.13MP
Lens optical zoom 10x, F=4.7~47mm
Digital zoom 12x (360x with optical zoom)
Min object distance 10mm(wide end) to 1200mm(tele end). Default 300mm
Field of View D: Wide 61.11° ± 5% Tele 7.65° ± 5%
H: Wide 35.2° ± 5%, Tele 4.12° ± 5%
Sync system Progressive scanning
S/N ratio more than 52dB
Min illumination Color 0.05lux@F1.6
Gain Auto
White balance Multi modes
Shutter speed 1/1s to 1/10,000s, 22 steps
Backlight compensation Yes
Aperture control 16 steps
Defog Yes
OSD Yes
Fotoformate JPEG
Videoformate MP4
Camera Object Tracking
Update rate of deviation pixel 50Hz
Output delay of deviation pixel <10ms
Minimum object contrast 5%
SNR 4
Minimum object size 16*16 pixel
Maximum object size 160*160 pixel
Tracking speed ±32 pixel/frame
Object memory time 100 frames (4s)
The mean square root values of pulse noise in the object position < 0.5 pixel
Thermal imager spec
Lens size 25mm
Horizontal FOV 24.6°
Vertical FOV 18.5°
Diagonal FOV 30.4°
Detective Distance (Man: 1.8x0.5m) 735 meters
Recognize Distance (Man: 1.8x0.5m) 184 meters
Verified Distance (Man: 1.8x0.5m) 92 meters
Detective Distance (Car: 4.2x1.8m) 2255 meters
Recognize Distance (Car: 4.2x1.8m) 564 meters
Verified Distance (Car: 4.2x1.8m) 282 meters
Working mode Uncooled long wave (8μm~14μm) thermal imager
Detector pixel 640*480
Pixel size 17μm
Focusing method Athermal prime lens
Emissivity correction 0.01~1
NETD ≤50mK (@25)
MRTD ≤650mK (@characteristic frequency)
Image enhancement Auto adjust image brightness and contrast ratio
Color palette White, iron red, pseudo color
Auto Non-uniform correction Yes (no shutter)
Digital zoom 1x, 3x
Sync correct time Yes
Thermometry type Temperature bar (psudo color display) max temp, min temp, FOV center temp (Optional)
Temperature warning 0~100
Thermal Object Tracking
Update rate of deviation pixel 25Hz
Output delay of deviation pixel <3ms
Minimum object size 16*16 pixel
Maximum object size 128*128 pixel
Tracking speed ±32 pixel/frame
Object memory time 100 frames (4s)
Packing Information
N.W. 750g
Product meas. 135.6*135.4*117mm
Accessories 1pc gimbal camera device, 16pcs screws,  4pcs copper cylinders, 12pcs damping balls, 4pcs damping boards / Hight quality plastic box with foam cushion

Addr: Room 2303, East Block B, Coast Times Apartment, Shennan Blvd., Nanshan District, Shenzhen, China

Tel: +86 755 86052486     Email: info@viewprotech.com

Copyright 2018. Shenzhen Viewpro Technology Co., Ltd. All rights reserved.