Professioanl 3-axis High-precise FOC Program


Stabilizing the Z12TL is a highly optimized 3-axis camera gimbal with pinpoint-precise motor rotation with a control accuracy of ±0.02°, powered by a dedicated processor. Z12TL uses a unique mechanically limited design and concealed wires to ensure more stable data transmission and greater duarbility. Vibration is eliminated using four damping balls and a lightweight damping boad, creating seamlessly smooth video. 300° rotation remains possible through gimbal rotation. Stable, smooth footage image can be captured even when flying at high speed flight.


                                                                   12x Starlight Zoom Camera, 500 meter Laser Light


Powered by IMX185-1/1.9" CMOS module, with 0.005lux@F1.5 starlight level ultra low illumination, Z12TL can still clearly display image features in utter poor light enviroment. 2mega effective pixel and 1080p HD image quality, combined with powerful optical zoom technology and 500 meter laser light supplement, the observation range is up to 500 meters even at a picth black night, which can meet the application requirements of various domains.

 


                         

                                                                                               Object Tracking


Build-in normalization, cross-correlation and tracking algorithm, combining with object missing recature algorithm, achieve stable track of the target. Support custom characters of user OSD, adaptive gate, cross cursor, trace information display. The tracking speed is up to 32 pixel/frame, object size range is from 16*16 pixel to 160*160* pixel, with the minimal signal-to-noise ratio (SNR) 4dB, the mean square root values of pulse noise in the object position<0.5 pixel, which greatly improve the accuracy and tracking effect.


                        

                                                                                                                

                                                                                                 Applications


Mainly supply in fire-fighting, power tower and pipeline inspection, search and rescue etc. A wide range of monitoring and searching is required in an emergency to quickly transfer the situation, improve response efficiency and reduce casualties.


                                     

Specification


Hardware Parameter
Working voltage 14V ~ 16V
Input voltage 3S ~ 4S
Output voltage 5V (connect with PWM)
Dynamic current 450mA @ 12V
Idle current 330mA @ 12V
Power consumption ≤ 5.4W
Working environment temp. -20 ~ +60
Output  micro HDMI (HD output 1080P 60fps) / IP
Local-storage SD card (Up to 128G, class 10, FAT32 or ex FAT format)
Control method PWM  / TTL / S.BUS
Gimbal Spec
Pitch/Tilt ±90°
Roll ±85°
Yaw/Pan ±150°
Vibration angle Pitch/Roll: ±0.02°, Yaw±0.03°
One-key to center
Camera Spec
Imager Sensor IMX185-1/1.9" CMOS
Picture quality Full HD 1080 (1920*1080)
Effective pixel 2MP
Lens optical zoom 12x, F=7.0~84mm
Digital zoom 12x (360x with optical zoom)
Sync system Progressive scanning
S/N ratio more than 55dB
Min illumination 0.005lux@F1.5 (Color), 0.0005Lux@F1.5 (black/white) Starlight level
Gain Auto
White balance Multi modes
Shutter speed <1S
Backlight compensation Yes
Aperture control 16 steps
Defog Yes
OSD Yes
Fotoformate JPEG
Videoformate MP4
Camera Object Tracking
Update rate of deviation pixel 50Hz
Output delay of deviation pixel <10ms
Minimum object contrast 5%
SNR 4
Minimum object size 16*16 pixel
Maximum object size 160*160 pixel
Tracking speed ±32 pixel/frame
Object memory time 100 frames (4s)
The mean square root values of pulse noise in the object position < 0.5 pixel
Laser Light Supplement
Effective range 500 meters
Light wave length 850 ± 10nm (940nm, 980nm)
Illumination angle power zoom synchronously, 70°~2.0° adjustable
Zoom time 2s (wide end - tele end)
Power consumption of laser chipset 2 ± 0.2W
Illumination angle Tele end 2.0°: effective range 500 meters, spot diameter < 20 meters
Wide end 70°: effective range  40 meters
Working voltage DC12V ± 10%
Power consumption in total < 11W
Control system PWM/TTL
Communication system UART_TTL
Communication protocol PELCO-D (defualt baud rate 9600bps)
Packing Information
N.W. 1265g
Product meas. 163*164*158mm
Accessories 1pc gimbal camera device, 16pcs screws,  4pcs copper cylinders, 12pcs damping balls, 4pcs damping boards / Hight quality plastic box with foam cushion

Addr: Room 2303, East Block B, Coast Times Apartment, Shennan Blvd., Nanshan District, Shenzhen, China

Tel: +86 755 86052486     Email: info@viewprotech.com

Copyright 2018. Shenzhen Viewpro Technology Co., Ltd. All rights reserved.