Product Description

 

Z-DUO PRO is tailored for FLIR DUO pro with a pinpoint-precision, three axis gimbal, which adopts pinpoint-precision encoder in each motor, use FOC

algorithm controller, it has the advantages of high stability, small size, light

weight and low power consumption.

Z-DUO PRO supports both PWM control and serial command control, suitable

for close range remote control or remote data command control.

The speed of Z-DUO PRO gimbal is adjustable, LOW speed mode is used for large zoom range, the control will be more accurate; Fast speed mode is used for small zooming range, which makes the gimbal control sensitive and quick. Also the one-key to center function will allow the gimbal return to initial position automatically and rapidly.



 

Hardware Parameter
Working voltage 12V ~ 16V
Input voltage 3S ~ 4S
Dynamic current 450mA @ 12V
Idle current 330mA @ 12V
Power consumption ≤ 5.4W
Working environment temp. -10℃ ~ +50℃
Output  micro HDMI(HD output 1080P 60fps) 
Control method PWM  / TTL / S.BUS
Gimbal Spec
Pitch/Tilt ±90°
Roll ±85°
Yaw/Pan ±150°
Vibration angle Pitch/Roll: ±0.02°, Yaw:±0.03°
One-key to center
Compatibility
Compatible cameras FLIR Duo Pro
  Use FOC algorithm controller
Gimbal Function Supply power, camera zoom, record and photo shooting etc
Packing Information
N.W. 400g
Product meas. L105.3 *W 113.3*H133.3mm

 

 

Addr: Room 2303, East Block B, Coast Times Apartment, Shennan Blvd., Nanshan District, Shenzhen, China

Tel: +86 755 86052486     Email: info@viewprotech.com

Copyright 2018. Shenzhen Viewpro Technology Co., Ltd. All rights reserved.