Professional 3-axis High-precise FOC Program


Stabilizing the Z30UX is a highly optimized 3-axis camera gimbal with pinpoint-precise motor rotation with a control accuracy of ±0.01° powered by a dedicated processor. Rather than rely on electrical slip rings - as is common with many gimbals - the Z30UX uses a unique mechanically limited design and concealed wires to ensure more stable data transmission and greater durability. Vibration is eliminated using four damping balls and a lightweight damping board, creating seamlessly smooth video. 360° rotation remains possible through gimbal rotation. Stable, smooth footage image can be captured even when flying at high speed flight.


 

High Resolution Dual EO Zooming Camera

 

 

 

Powered by SONY 1/2.3 Exmor R CMOS module, with 0.01lux@F1.6 starlight level min illumination, Z30UX can still clearly display image features in utter poor light environment. With the second wide angle prime lens 4K camera,  5184 x 3888 pixels image quality, combined with 30x advanced optical zoom technology, the observation range is up to 6000 meters, which can meet the application requirements of various domains.

 

 


Multi Output Methods Optional

 

Z30UX supports both HDMI output, Ethernet/IP output. HDMI and output are 1080p, Ethernet output default as 1080P and record is 1080p. IP output and SDI output versions will support 360 degree enless pan.

 

 

Multi Control Methods

 

Default PWM and Serial port TTL control, SBUS is optional. With Viewpro software Viewlink you can fulfill IP output, TTL control.


Control box signal interfaces:



Compatible with Viewport

 

Z30UX is compatible with Viewpro quick release connector Viewport. Viewport is an option known as easy assembly, plug and play.

 

For more information about Viewport, please check below video instruction:

 

 

Application 


Mainly supply in law enforcement, fire-fighting, power tower and pipeline inspection, search and rescue etc. A wide range of monitoring and searching is required in an emergency to quickly transfer the situation, improve response efficiency and reduce casualties.

 

 

 

 

 

Dimentions

 

Specification

   
Hardware Parameter
Working voltage 12V
Input voltage 3S ~ 6S
Output voltage 5V (connect with PWM)
Dynamic current 550mA @ 12V
Idle current 480mA @ 12V
Working environment temp. -0 ~ +40
Output  IP(1920*1080)
Local-storage SD card (Up to 128G, class 10, FAT32 or ex FAT format)
Photo storage format JPG(5184*3888) 
Video storage format H264  (1920*1080)
Control method PWM  / TTL / S.BUS 
Gimbal spec
Mechanical Range Pitch/Tilt: -90°95°,    Roll: ±70°,     Yaw/Pan: ±360°*N
Controllable Range Pitch/Tilt: -45°90°,   Yaw/Pan:  ±360°*N
Vibration angle Pitch/Roll: ±0.02°, Yaw±0.02°
One-key to center
Camera Spec
Imager Sensor 1 SONY 1/2.3" "Exmor R" CMOS
Lens optical zoom 30x, F=4.3~129mm
Picture quality 5184 × 3888 pixels (4:3)
Imager Sensor 2 Wide angle prime lens 4K camera
Packing Information
N.W. 659g
Product meas. 175*123.1*163.4mm
Accessories 1pc gimbal camera device, screws, copper cylinders, damping balls, damping boards / Hight quality plastic box with foam cushion
G.W. 2860g
Package meas. 360*300*250mm


Addr: Room 2303, East Block B, Coast Times Apartment, Shennan Blvd., Nanshan District, Shenzhen, China

Tel: +86 755 86052486     Email: info@viewprotech.com

Copyright 2018. Shenzhen Viewpro Technology Co., Ltd. All rights reserved.